Home
News
Technology
Temp.Controllers
Sensor Selection
Flow Products
Manifolds
Support
About Us

 

 

 

 

 

CITO Products, Inc.

N8779 Hwy. X

P.O. Box 90

Watertown, WI 53094

USA

Tel: 920-261-2606

Fax: 920-261-1350

sales@pulsecooling.com

support@pulsecooling.com

FlowReadout™

  • Accurate Flow Measurement
  • Gallon Per Minute or Liter Per Minute

The infrared flow sensor respond to each pass of the rotary turbine blade. Each flow turbine may be calibrate to its flow rate.

Instruction & Operation Manual

Read your flow rate. Clip the flow sensor onto the turbine window.

ThermoFlow™ Analyzer

  • Flow Measurement (GPM /LPM)

  • Temperature measurement (°F /°C)

  • Calculations (BTU / Kilojoules)

This unit was designed to measure en display temperature, flow and BTU status; thus current heat exchange measurement can be provided from a mold or heat exchanger.

To measures BTU's clip flow sensor connector Tc1 to ingoing and Tc2 to out going line. Read flow, temperature and BTU's on display

 

RotoFlow™

 

 

  • Predictable Linear Output
  • Observe Flow Visually
  • Use with Flow Readout
  • Flow rates from .2 to 60 GPM
  • Available with Screen Cap
  • Available with Temperature Cap

RotoFlow™ Combination

(Screen Cap and  Temperature Insert)

Flow Kits with 2 RotoFlows™

     

               FlowReadout™                   Thermoflow™ Analyzer                Thermoflow™ Analyzer

               Kit #FRK-2212                   Kit #FKA-2202                            Kit #FKA-2212

 

Flow Kits with 3 RotoFlows™

       

FlowReadout™

Kit # FKR-3302

Thermoflow™ Analyzer 

Kit # FKA-3302

Thermoflow™ Analyzer 

Kit # FKA-3312

 
This diagram depicts a single zone mold temperature control schematic with internal mold temperature probe
 

Price List PDF

 
 Copyright © 2016 CITO Products, Inc.                                                                                                                                       Last modified: January 22, 2009